2015 Ranger 168 Phantom

$25,990.00


New/Used
Used
Availability
In Stock
Location
Norris Marine Center
Stock #
B80042A
Title
Clean
Condition
Excellent
Year
2015
Manufacturer
Ranger
Model
168 Phantom
Length Overall
16' 11"
Beam
6' 11"
Fuel Type
Gas
Engine Type
Outboard
Engine Make
EVINRUDE
Engine Model
2015 75
Hull Type
Fiberglass

Overview

Dealer Insights

With an ultra shallow draft, zero hull slap at any wind angle, an incredibly smooth ride, and solid beam-to-beam stability, the Ranger 168 Phantom sets higher standards for extreme shallow water performance. Deck and cockpit space exceeds any other boat in its class and the oversized gunnels deliver a true 360-degree fishing surface. At the stern, a unique, forward-canted poling platform is engineered for optimum weight distribution and a level profile front to rear. The overall design balance reinforces its noticeably shallow draft while providing even easier poling. Combined with a tournament-sized live release well and baitwell, recessed trim tabs, flush-mounted push pole holders, and a fully featured aluminum RangerTrail trailer, the 168 Phantom is taking shallow water performance to the next level.

Standard Features

POWER/PERFORMANCE
• Available with a Wide Range of Precision Matched Outboards
• Binnacle Throttle Control
• Foam Filled Fiberglass Stringer System
• Hydraulic Steering
• Jack Plate - 6" Hydraulic
• Poling Strakes
• Spray Rails
• Pultruded Fiberglass Transom
• Re-circulating Aerated Livewell/Baitwell with High Speed Pickup and In-Line Filter
• Stainless Steel Steering Wheel with Assist Knob

ELECTRONICS
• 12V DC Power Receptacle
• Corrosion Resistant Wiring and Resetable Breakers
• Cranking Battery with Tie Down
• Navigation Lights
• LED Cockpit Lights
• Speed, Tach, Fuel, Trim and Water Pressure Gauges By Engine Manufacturer

SAFETY/COMFORT
• Automatic Bilge Pump
• Manual Bilge Pump
• Custom Fitted Premium Marine Upholstery Driver and Passenger Bench Cushion
• Fire Extinguisher & Horn
• Heavy Duty Rubrail
• Assisted Bailing Cockpit
• Skid Resistant Deck and Interior
• Stainless Steel Bow/Stern Eyes
• Stainless Steel Grab Handles @ Console
• Stainless Steel Pull Up Cleat @ Bow
• Upright Level Flotation
• Stainless Steel Steering Wheel
• *Photos may show optional features and/or equipment.

CUSTOM DETAILS
• Rod Holders at the Console
• Anchor Locker
• Flush Mount Push Pole Holders
• Gel-Coated Storage Boxes
• Poling Platform (Powder Coated)
• Rod Box Organizers
• Aluminum Console Rod Racks (Powder Coated)
• Stainless Steel Fittings
• Stainless Steel Lid Locks
• Storage Under Front and Rear Deck
• Trim Tabs

TRAILER FEATURES
• Aluminum Wheels with Matching Spare Tire & Wheel
• Center Swing Jack
• Matching Stainless Steel Fenders
• Ranger Trail® COOL Hub® Oil Bath Hubs
• Custom Swing-Away Tongue
• Torsion Axles.

Description

With an ultra shallow draft, zero hull slap at any wind angle, an incredibly smooth ride, and solid beam-to-beam stability, the 168 Phantom is setting even higher standards for extreme shallow water performance. Deck and cockpit space exceeds any other boat in its class and the oversized gunnels deliver a true 360° fishing surface. At the stern, a unique, forward-canted poling platform is engineered for optimum weight distribution and a level profile front to rear. The overall design balance reinforces its noticeably shallow draft while providing even easier poling. Combined with a tournament-sized live release well and baitwell, recessed trim tabs, flush-mounted push pole holders, and a fully featured aluminum RangerTrail trailer, the 168 Phantom is taking shallow water performance to the next level.

Specifications
  • Overall Hull Length: 16' 8"
  • Beam: 83"
  • Overall Beam w/Rubrail: 84 1/2"
  • Max Horsepower: 75
  • Engine Shaft Length: 20"
  • Inside Depth: 11 1/2"
  • Draft (Engine up, batteries, fuel and accessories): 6"
  • Fuel Capacity : 15 gal.
  • Livewell Capacity: 16 gal.
  • Total Persons, Motor, Gear : 1070 lb.
  • Approximate Boat Weight, Single Console: 650 lb.
Power & Performance
  • Available with a Wide Range of Precision Matched Outboards
  • Binnacle Throttle Control
  • Foam Filled Fiberglass Stringer System
  • Hydraulic Steering
  • Jack Plate - 6" Hydraulic
  • Poling Strakes
  • Spray Rails
  • Pultruded Fiberglass Transom
  • Re-circulating Aerated Livewell/Baitwell with High Speed Pickup and In-Line Filter
  • Stainless Steel Steering Wheel with Assist Knob
Electronics
  • 12V DC Power Receptacle
  • Corrosion Resistant Wiring and Resetable Breakers
  • Cranking Battery with Tie Down
  • Navigation Lights
  • LED Cockpit Lights
  • Speed, Tach, Fuel, Trim and Water Pressure Gauges By Engine Manufacturer
Safety/Comfort
  • Automatic Bilge Pump
  • Manual Bilge Pump
  • Custom Fitted Premium Marine Upholstery Driver and Passenger Bench Cushion
  • Fire Extinguisher & Horn
  • Heavy Duty Rubrail
  • N.M.M.A. Certified
  • Assisted Bailing Cockpit
  • Skid Resistant Deck and Interior
  • Stainless Steel Bow/Stern Eyes
  • Stainless Steel Grab Handles @ Console
  • Stainless Steel Pull Up Cleat @ Bow
  • Upright Level Flotation
  • Stainless Steel Steering Wheel
Custom Details
  • Rod Holders at the Console
  • Anchor Locker
  • Flush Mount Push Pole Holders
  • Gel-Coated Storage Boxes
  • Poling Platform (Powder Coated)
  • Rod Box Organizers
  • Aluminum Console Rod Racks (Powder Coated)
  • Stainless Steel Fittings
  • Stainless Steel Lid Locks
  • Storage Under Front and Rear Deck
  • Trim Tabs
Trailer Features
  • Aluminum Wheels with Matching Spare Tire & Wheel
  • Center Swing Jack
  • L.E.D. Lighting
  • Matching Stainless Steel Fenders
  • Ranger Trail® COOL Hub® Oil Bath Hubs
  • Custom Swing-Away Tongue
  • Torsion Axles

Specs

Engine

Max HP
75 hp

General

Length Overall
16 ft. 8 in.
Beam
83 in.
Draft
6 in.
Dry Weight
650 lb.
Fuel Capacity
15 gal.
Max Carry Load
1070 lb.